Blizzard Lighting™ assumes no responsibility or liability for any errors or omissions that may appear in this user manual. Blizzard Lighting™ reserves the right to update the existing document or to create a new document to correct any errors or omissions at any time.
Caution! There are no user serviceable parts inside the unit. Do not open the housing or attempt any repairs yourself. In the unlikely event your unit may require service, please contact us at www.blizzardlighting.com/support. Page 4 Kryo.Morph™ User Manual - Rev. A (c) 2016 Blizzard Lighting, LLC...
Maximum capacitance between conductors – 30 pF/ft. Maximum capacitance between conductor & shield – 55 pF/ft. Maximum resistance of 20 ohms / 1000 ft. Nominal impedance 100 – 140 ohms Page 7 Kryo.Morph™ User Manual - Rev. A (c) 2016 Blizzard Lighting, LLC...
Step 3: Connect other fixtures in the chain from output to input as above. Place a DMX terminator on the output of the final fixture to ensure best communication. Page 8 Kryo.Morph™ User Manual - Rev. A (c) 2016 Blizzard Lighting, LLC...
• Safety cables MUST ALWAYS be used. • Never mount in places where the fixture will be exposed to rain, high humidity, extreme temperature changes or restricted ventilation. Page 9 Kryo.Morph™ User Manual - Rev. A (c) 2016 Blizzard Lighting, LLC...
Better safe than sorry! Be sure to complete all rigging and installation procedures before connecting the main power cord to the appropriate wall outlet. Page 10 Kryo.Morph™ User Manual - Rev. A (c) 2016 Blizzard Lighting, LLC...
Be sure to only use the designated rigging point found on the underside of the base assembly for the safety cable. Never secure a safety cable to a carrying handle. Page 11 Kryo.Morph™ User Manual - Rev. A (c) 2016 Blizzard Lighting, LLC...
6.) Slide both fastons onto the new lamp blades 7.) Reinstall the lamp compartment cover. Never operate this fixture without the lamp! Do not operate this fixture without the lamp cover! Page 12 Kryo.Morph™ User Manual - Rev. A (c) 2016 Blizzard Lighting, LLC...
7.) Reinstall the lamp compartment cover, connect the fixture to the mains and check if the adjustment has been correctly made. To adjust again, disconnect the fixture from mains and repeat Page 13 Kryo.Morph™ User Manual - Rev. A (c) 2016 Blizzard Lighting, LLC...
Press the <ENTER> button once from startup to reach the home screen, use the <UP/DOWN> buttons to scroll through the menu, press <ENTER> for the sub menu to make changes or touch the icon on the screen. Page 14 Kryo.Morph™ User Manual - Rev. A (c) 2016 Blizzard Lighting, LLC...
Use. Mang. MANUAL REST (reset) ALL MOTOR (Yes/No) PART MOTOR (Yes/No) XY MOTOR (Yes/No) TEST RUN AUTO SOUND SMULATE DMX (Add value CH1-CH32 (0-255) to the DMX channels) Page 15 Kryo.Morph™ User Manual - Rev. A (c) 2016 Blizzard Lighting, LLC...
Page 16
Menuback 10Sec/20Sec/30Sec/Off Flicker ON/OFF Save LAMP SETTINGS Default ON/OFF Manual ON/OFF Electronic ON/OFF ROTATE DISPLAY Change orientation of the display LANGUAGE Chinese/English BACK Back to LOGO screen Page 16 Kryo.Morph™ User Manual - Rev. A (c) 2016 Blizzard Lighting, LLC...
218 <--> 243 Backwards rainbow effect (slow <--> fast) 244 <--> 249 Random color selection by sound control 250 <--> 255 Random color selection by audio control Reserved Reserved Page 17 Kryo.Morph™ User Manual - Rev. A (c) 2016 Blizzard Lighting, LLC...
Verify proper mode of operation. Is the fixture in “Auto” mode? On Its Own If your problem isn’t listed, or if problems persist, please open a support ticket at www.blizzardlighting.com/support. Page 23 Kryo.Morph™ User Manual - Rev. A (c) 2016 Blizzard Lighting, LLC...
It is flexible, robust, and scalable, and its ability to control everything from dimmer packs to moving lights to foggers to lasers makes it an indispensable tool for any lighting designer or lighting performer. Page 24 Kryo.Morph™ User Manual - Rev. A (c) 2016 Blizzard Lighting, LLC...
Damage incurred in shipping is the responsibility of the shipper, and must be reported to the carrier immediately upon receipt of the items. Claims must be made within seven (7) days of receipt. Page 25 Kryo.Morph™ User Manual - Rev. A (c) 2016 Blizzard Lighting, LLC...
Neutrik AG, Neutrik USA and their related entities, however they are not manufactured by, affiliated with or endorsed by Neutrik AG, Neutrik USA, or any related entity. Neutrik® and powerCON® are registered trademarks of Neutrik AG. Page 26 Kryo.Morph™ User Manual - Rev. A (c) 2016 Blizzard Lighting, LLC...
Need help?
Do you have a question about the KAYO.MORPH and is the answer not in the manual?
Questions and answers