Operating Adjustments; Control Panel Menu Structure; Dmx Mode; Master/Slave Mode - Blizzard Lighting REANIMATOR Quick Start Manual

4. OPERATING ADJUSTMENTS

DMX Mode

Allows the unit to be controlled by any universal DMX controller.
1.) Press the <MENU> button until you reach DMX mode, which appears as
A001
on the LED Readout. Use the <ENTER> button then the <UP> and
<DOWN> buttons to choose a channel between
again to confi rm.
Master/Slave Mode (Auto/Sound Active):
Allows you to link up to 32 units together without a controller.
1.) Use standard DMX cables to daisy chain your units together via the DMX con-
nector on the rear of the units. It may be necessary to use a terminator at the
last fi xture. For more information about terminators, see page 8.
2.) Choose a unit to function as the Master. Select from one of the run modes,
RUN1-RUNF or sound activation. The master unit must be the fi rst unit. Finally,
chain the units together using DMX cable.
Master
3.) Select slave function by using the <UP>/<DOWN> keys to reach A001 in
the menu on the slave units, and they will react in the same as the Master.
Slave
4.) On the master fi xture, use the <UP>/<DOWN>/<MENU> keys to reach
RUN1-F/Soud, which allows you to select the Master/Slave mode.
Sound active
Auto mode

Pattern Playback Adjustments:

Allows you to adjust the playback characteristics of the automatic programs.
Run1 - Run F
Each program is different. Perhaps you should study them in depth and write a
short treatise on the differences. Otherwise, just enjoy them all!
L001-L255
Adjusts the number of patterns to display
F001-F255
Adjusts the number of frames to display of each animation
P000-P255
Animation speed (Slow <--> Fast)
LEon
= LED Control Panel remains on
LoFF
= LED Control Panel shuts off after approximately 30 seconds.
Reanimator Manual Rev. A
RUN1-F
then <ENTER> to confi rm.
A001
then <ENTER> to confi rm.
SoUd
then <ENTER> to confi rm.
RUN1-F
then <ENTER> to confi rm.
then <ENTER> to confi rm.
then <ENTER> to confi rm.
then <ENTER> to confi rm.
then <ENTER> to confi rm.
Page 8
1 512
and . Press <ENTER>
Copyright (c) 2011-12 Blizzard Lighting, LLC