Operating Adjustments; Dmx Mode & Dmx Mode Selection; Master/Slave Mode; Sound Active Mode - Blizzard Lighting The Puck 3NX Manual

4. OPERATING ADJUSTMENTS

NOTE: After making any adjustment, hold the <MENU> button for approximately
3 seconds, otherwise the fi xture will return to the correct mode after approxi-
DMX Mode
Allows the unit to be controlled by any universal DMX controller.
1.) The default mode for the fi xture is DMX, which appears as
Readout. Use the <ENTER> button then the <UP> and <DOWN> buttons to
choose a channel between
2.) To change between 3 and 6 channel DMX mode, select
<ENTER>. Select either
fi rm.
Master/Slave Mode (Auto/Sound Active/Color Preset/Custom):
Allows you to link up to 32 units together without a controller.
1.) Use standard DMX cables to daisy chain your units together via the DMX con-
nector on the rear of the units.
2.) Choose a unit to function as the Master. Select MAST. The master unit must
be the fi rst unit. Finally, chain the units together using DMX cable.
Master
3.) Select slave function by using the <UP>/<DOWN> keys to reach SLAV in
the Master/Auto menu on the slave units, and they will react in the same as the
Master.
Slave
NOTE: Fixtures in slave mode will display "
Return the fi xture to master mode to use it as a standalone fi xture.
4.) On the master fi xture, use the <UP>/<DOWN> keys to reach SHND, which
allows you to select the Master/Slave mode.
Sound active
Auto mode
Color preset
Fade Mode
NOTE: Speed 1 = Fastest (Approx. 1.5 sec. per color), Speed 8 = Slowest (Approx.
2 min. per color).
The Puck 3NX Manual Rev. A
mately 10 seconds.
1 512
and . Press <ENTER> again to confi rm.
6Ch 3Ch
or , then press <ENTER> again to con-
SLNd NASt
then
SLNd SLAu
then
STBY
SoUn
then <ENTER> to confi rm.
CoLo Auto,
then
CoLo CoL 1 - CoL 7,
then
FAdE SP 1 - SP 8,
then
Page 8
Addr
ChNd,
then press
to confi rm.
to confi rm.
" (Standby). This is NORMAL.
then <ENTER> to confi rm.
<ENTER>.
<ENTER>.
Copyright (c) 2011-2012 Blizzard Lighting, LLC
on the LED