Dmx Mode; Starting Dmx Address; Dmx Channel Mode; M/S Mode - Blizzard Lighting mikrokassette Manual

DMX Mode

Allows the unit to be controlled by any universal DMX controller.

Starting DMX Address

1.) Navigate the main menu until you reach Addr, and press the
<ENTER> button. Then use the <UP/DOWN> buttons to select a
starting DMX address ranging from 1-512, and press <ENTER>.

DMX Channel Mode

1.) Navigate the main menu to CHnd, and press the <ENTER> button.
Then use the <UP/DOWN> buttons to select 4Ch, or 8Ch, and press
the <ENTER> button to confirm.

M/S Mode

1.) Daisy chain the DMX input/output connections of the fixtures.
2.) On the secondary fixtures, navigate to SLAU and press <ENTER>.
3.) Your secondary fixtures will now follow the first fixture.
Auto, Sound Active, & Manual Adjustments
Allows a single or daisy chained units to run factory installed programs.

Auto Mode

1.) Navigate the menu until you reach AUTO, and press <ENTER>.
Color Jump & Color Fade
1.) Navigate the menu until you reach JUNP (color jump), or FAdE
(color fade), and press <ENTER>.
2.) Use the <UP/DOWN> buttons to highlight 01-15 (slow <--> fast
effect speed), and press <ENTER>.
3.) To add strobe (color jump only), use the <UP/DOWN> buttons to
select JF-0 to JF-4 (slow to fast), and press <ENTER>.

Sound Active Mode

1.) Navigate the menu until you reach SOUn, and press <ENTER>.
2.) Then to adjust mic sensitivity, use the <UP/DOWN> buttons to
select from Sd00 - Sd08 (decrease <--> increase).

Manual Color Adjustments

1.) Navigate to NAnU (RGBW color mixing), or COLO (gradual colors),
and press <ENTER>.
2.) For color mixing in NAnU, adjust the Red (r), Green (G), Blue (b),
and White (U) intensity levels from 0-255, and press <ENTER>.
3.) In COLO, use the <UP/DOWN> buttons to highlight any value
from 0-255 and press <ENTER>.
4.) To add strobe, use the <UP/DOWN> buttons to select CF-0 to
CF-4 (slow to fast), and press <ENTER>.
Mikrokassette™ Manual - Rev. A
Page 12
© 2020 Blizzard Lighting, LLC