Table of Contents
Advertisement
DMX Mode
Allows the unit to be controlled by any universal DMX controller.
Starting DMX Address:
1.) Navigate the main menu until you reach Addr, and press the
<ENTER> button. Then use the <UP/DOWN> buttons to select a
starting DMX address ranging from 1-512, and press <ENTER>.
DMX Channel Mode:
1.) Navigate the main menu to the last option, which is the channel
mode selection, and press the <ENTER> button. Then use the <UP/
DOWN> buttons to select 1Ch, 2Ch1, 2Ch2, 3Ch1, 3Ch2, 3Ch3,
4Ch, or 6Ch, and press the <ENTER> button to confirm.
M/S Mode:
1.) Daisy chain the DMX input/output connections of the fixtures.
2.) On the secondary fixtures, navigate to SLAV and press <ENTER>.
3.) Your secondary fixtures will now follow the first fixture.
Auto, Sound Active, & Manual Adjustments
Allows a single or daisy chained units to run factory installed programs.
Auto Mode:
1.) Navigate the menu until you reach AUTO, and press <ENTER>.
Color Jump & Color Fade:
1.) Navigate the menu until you reach JU00 (Color Jump), or FA00
(Color Fade), and press <ENTER>.
2.) Use the <UP/DOWN> buttons to highlight 00-99 (slow <--> fast
effect speed), and press <ENTER>.
3.) Then to add strobe to the effect, use the <UP/DOWN> buttons to
highlight JF00 (in color jump), or AU00 (in color fade), and press the
<ENTER> button.
4.) Use the <UP/DOWN> buttons to highlight 00-99 (slow to fast),
and press <ENTER>.
Sound Active Mode:
1.) Navigate the menu until you reach SOUN, and press <ENTER>.
2.) Then to adjust mic sensitivity, use the <UP/DOWN> buttons to
select from S000 - S099 (decrease <--> increase).
Color Mixing and Presets:
1.) Navigate to C000 (mixing) or CN00 (preset), and press <ENTER>.
2.) For manual color mixing, adjust the Red (C1), Green (C2), and
Blue (C3) intensity levels from 0-255, and press the <ENTER> button.
3.) For preset colors, highlight 01-07 and press <ENTER>.
MAX L™ User Manual - Rev. A
Page 12
© 2020 Blizzard Lighting, LLC
Advertisement
Table of Contents
