Custom Color Display; Additional Operating Help - Blizzard Lighting the puck User Manual

To set a custom color in Master/Slave / Standalone Mode:
Using this function, you can select any color by adjusting the Red, Green and Blue values
from 0-255. You may also adjust the color balance of the fixture.
Please note that modifying the values in this step will affect ALL modes, therefore
we recommend resetting all levels to their highest value (255) after using this
mode.
1.) Select
2.) Choose
confirm.
3.) Using the <UP>/<DOWN> keys, select the color you wish to display by
varying Red/Green/Blue/Amber/White intensity between 0 and 255, then hit
<ENTER> to confirm each color choice.
4.) Select Color preset mode as instructed above, then select
<ENTER> to confirm.
Stuck? Want More
helpful tutorial video
That should tell you everything you need to
Puck Couch Potato RGBAW Manual Rev. A
NAnu
from the control panel, then hit <ENTER>.
rEd, GrEE
,
Information?
Check out our
HERE:
http://youtu.be/xVKhmV-v0jA
bLuE, ANbE or Uhit
know!
Page 15
, then hit <ENTER> to
Co 31.
then
Copyright (c) 2012 Blizzard Lighting, LLC