DMX Mode
Allows the unit to be controlled by any universal DMX controller.
Starting DMX Address
1.) Navigate the main menu until you reach Addr, and press the
<ENTER> button. Then use the <UP/DOWN> buttons to select a
starting DMX address ranging from 1-512, and press <ENTER>.
DMX Channel Mode
1.) Navigate the main menu to CHnd, and press the <ENTER> button.
Then use the <UP/DOWN> buttons to select 9Ch or 11Ch, and press
the <ENTER> button to confirm.
M/S Mode
1.) Daisy chain the DMX input/output connections of the fixtures.
2.) On the 1st fixture, navigate to SLNd > NAST and press <ENTER>.
3.) On the secondary fixtures, navigate to SLNd, press <ENTER>, then
hightlight SL 1 (for same movements at the master fixture) or SL 2
(mirrored movements of the master fixture), and press <ENTER>.
4.) Your secondary fixtures will now follow the first fixture.
Auto, Sound Active, & Manual Adjustments
Allows a single or daisy chained units to run factory installed programs.
Auto Mode
1.) Navigate the menu until you reach Shnd, and press <ENTER>.
2.) Use the <UP/DOWN> buttons to highlight Sh 0 - Sh 3, and press
<ENTER> button to confirm your choice.
Sound Active Mode
1.) Navigate the menu until you reach Soud, and press <ENTER>.
2.) Use the <UP/DOWN> buttons to highlight On or Off, and press
<ENTER> button to confirm your choice.
3.) To adjust the mic sensitivity, navigate the menu to SEnS, and press
<ENTER>. Then use the <UP/DOWN> buttons to select 001 - 100
(decrease <--> increase), and press <ENTER>.
Reverse Pan/Tilt
1.) Navigate to rPan (reverse pan), or rTiL (reverse tilt), No or Yes, and
then press the <ENTER> button to confirm your choice.
Display Settings
1.) Navigate the menu to LEd, press <ENTER>, and select On (always
on) or Off (turns off after 5s of inactivity), then press <ENTER>.
2.) Navigate the menu to dISP, press <ENTER>, and select Yes
(normal) or No (rotate the display 180°). Press <ENTER> to confirm.
Spotman™ User Manual - Rev. A
Page 12
© 2020 Blizzard Lighting, LLC