Static Color Display; Automatic Programs; Run Mode - Blizzard Lighting Puck V12 User Manual

STAT
Static Color Display + Strobe
Allows you to display a static custom color using RGBAW color values.
Hit <ENTER> and then use the <UP> and <DOWN> buttons to select the
desired R/G/B/A/W value you want to edit. Hit <ENTER>. Use the <UP>
and <DOWN> buttons to change the desired value. Then push the <MENU>
button to confirm your choice and return to the previous menu option. Each
color has the adjustable values of 000 <--> 255 (0% <--> 100%). Strobe can
also be applied,
AUTO
Automatic Programs (Built-In and Custom)
This feature allows you to select from one of 10 built-in programs, or to select
one of 10 user-defined programs of up to 30 steps.
• AT.01-AT.10
• PR.01-PR.10
RUN

Run Mode

This is where you set the fixture to either DMX/Master or Slave Mode
• DMX
• SLAV
The Puck™ V12 Manual Rev. A
ST.00 ST.20
<-->
- Built-In Programs
- User-Defined Programs
- Set the fixture as the master
- Set the fixture as a slave
(slow <--> fast).
Page 17
© 2013 Blizzard Lighting, LLC