Pattern & Color Settings; Auto Mode, Sound Active, & Lost Dmx Settings; Manual Mode - Blizzard Lighting infinipix cyclone Getting Started

Control Panel Menu Structure
Addr
Chnd
Shnd
(show mode)
Lost
(lost DMX signal
default modes)
Sens
Sped
Naun

(manual mode)

Tenp
Led
Disp
Ver
defa
Auto Mode & Sound Active Modes
Note: To use Auto or Sound Active mode via the LED menu, you must make sure that a DMX signal is not
connected to the fixture, and then set the Lost DMX setting to either Auto or Soun.
1.) Navigate to Lost, press <ENTER> and choose Auto or Soun, and press <ENTER>.
2.) Now navigate the menu to reach Shnd, and press <ENTER>.
3.) Use the <UP/DOWN> buttons to highlight Shou (show), and select a show ranging
from Sh01-Sh85, and press <ENTER>.
4.) Now navigate the menu to reach Clor (pattern color), and select a pattern ranging
from CL01-CL21, and press <ENTER>.
5.) Then to change the background color, navigate to Clbk (color background). From
here you can adjust the Red, Green, and Blue intensity levels. Note: This function is
not available with all show patterns.
6.) To change the pattern speed used with auto mode, navigate the main menu to reach
Sped, and adjust the setting anywhere from 000-099.
Manual Mode
Note: To use Manual mode via the LED menu, make sure that the Lost DMX setting is set to Blac.
1.) Navigate the menu to reach Naun (manual mode), and press <ENTER>.
2.) Use the <UP/DOWN> buttons highlight red (red), gren (green), blue (blue), dinn
(master dimmer), or Stro (strobe) and press <ENTER>.
3.) Adjust the values for each selection as needed from 000-255.
InfiniPix™ Cyclone Manual Rev. A
001-512
4Ch
5Ch
8Ch
Shou
(show)
Clor
(pattern color)
Clbk
(not available
with some full-pixel
preset shows)
<ENTER>
000-099
000-099
<ENTER>
<ENTER>
<ENTER>
Norn/Flip
<ENTER>
<ENTER>
Set the starting address from 001-512
4-channel DMX mode
5-channel DMX mode
8-channel DMX mode
Sh01-Sh85 (see Pattern Effects on p. 12)
CL01-CL21 (see Color Macros on p. 13)
Red (red background intensity) 0-255
Gren (green background intensity) 0-255
Blue (blue background intensity) 0-255
Hold (holds last recieved DMX signal)
Auto (uses the pattern set in Shou)
Soun (uses the pattern set in Shou)
Blac (blackout)
Mic sensitivity level
Auto Speed (slow <-> fast)
Red (red intensity) 0-255
Gren (green intensity) 0-255
Blue (blue intensity) 0-255
Dinn (master dimmer) 0-255
Stro (strobe, see DMX values on p. 12)
Displays the internal temperature (C)
LED backlight always on, or turns off after 30s
Rotate the menu display by 180°
Software version
Reset to factory default settings
Page 11
© 2022 Blizzard Lighting, LLC