DMX Mode
Allows the unit to be controlled by any universal DMX controller.
1.) The default mode for the fixture is DMX, which appears as
Readout. To select a different DMX address, using the <MENU> button, select
Addr
,then hit <ENTER>. Use the <UP/DOWN> buttons to select the correct
address, then hit <ENTER> to confirm.
Stand-Alone, Master/Slave, Sound Active Modes:
Allows a single or Master/Slaved units to run factory installed programs at user selectable
speeds.
1.) To set the fixture in Flash/Fade mode, select
To confirm, press the <ENTER> button.
2.) Now, select the flash or fade speed using <MENU> button to reach
then hit <ENTER>.
The display reads
TER> button to confirm.
3.) To use the fixture in automatic mode, select
TER> button to confirm.
4.) Adjust the speed of the chase as above using
(fastest) then press the <ENTER> button to confirm.
5.) To set the fixture as a slave unit, select
will display a flashing
Sound Acitve Mode:
1.) To use sound active mode, select
to confirm.
Standalone (Program) Mode:
Allows a single unit to display a variety of colors and programs without a DMX controller.
1.) To set the fixture in manual mode, select
To confirm, press the <ENTER> button.
2.) Now, select the program by using the <UP> and <DOWN> buttons to select
Pr00-Pr15
Manual Color Adjustment:
Allows the user to adjust the color balance of the fixture. These settings are global, they
will effect all modes.
1.) Use the <MENU> and <UP/DOWN> button to select
GL--
(Green Level),
(White Level), then hit <ENTER>.
2.) Using the <UP/DOWN> buttons, select the maximum level for each color
x000-x255
between
ROCKLITE RGBAW Manual Rev. B
SP15
(slowest) to
SL-U
to indicate it is in slave mode.
. To confirm, press the <ENTER> button.
bL--
(Blue Level),
(000=off), then hit <ENTER> to confirm.
Page 12
FLAS or FAdE
SP00
(fastest), then press the <EN-
ASC-
, then press the <EN-
SP15
SLAV
, and hit <ENTER>. The unit
SouA
, then press the <ENTER> button
Pr--
.
rL--
AL--
(Amber Level), or
Copyright (c) 2010 Blizzard Lighting, LLC
d001
on the LED
SP--
SP00
(slowest) to
(Red Level),
UL--
,