Speakers - HP Split 13 x2 PC Maintenance And Service Manual

Speakers

Description
Speaker Kit (includes left and right speakers)
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Disconnect the tablet from the keyboard dock (see
on page
5. Remove the display rear cover (see
6. Disconnect the battery cable (see
7. Remove the bottom trim (see
8. Remove the card reader board (see
Remove the speakers:
1. Remove the three Phillips PM2.0×3.0 screws (1) that secure the speakers to the tablet.
2. Disconnect the speaker cable from the audio board (2).
3. Release the speaker cable from the clips built into the tablet (3).
4. Remove the speakers from the tablet (4).
Reverse these procedures to install the speakers.
32).
Bottom trim on page
Releasing the tablet from the keyboard dock
Display rear cover on page
Battery cable on page 46).
61).
Card reader on page 66).
Spare part number
732292-001
45).
Tablet components 67