Speakers - HP Pro x2 612 G2 Maintenance And Service Manual

Speakers

Description
Speakers
IMPORTANT:
Before removing the speakers, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the following components:
a. Keyboard (select products only) (see
b. Micro SIM card tray (see
c. MicroSD card tray (see
d. Rear cover (see
e. Disconnect the battery (see
f. Kickstand (see
g. SSD (see
h. Display panel (see
i. Battery (see
j. System board (see
Remove the speakers:
1. Lift the adhesive (1) securing the left speaker, and then lift the adhesive (2) securing the right speaker.
68 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Make special note of each screw size and location during removal and replacement
Micro SIM card tray on page
MicroSD memory card tray on page
Rear cover on page
Disconnecting the battery on page
Kickstand on page
SSD on page 38)
Display panel on page
Battery on page
System board on page
Keyboard (select products only) on page
32)
34)
36)
45)
49)
55)
Spare part number
921406-001
31)
33)
35)