●
Display cable (see
●
Touchscreen board cable (see
●
Volume board cable (see
●
Bottom trim (see
●
Audio board (see
●
Card reader cable (see
●
Speakers (see
●
Battery (see
Battery on page
●
Frame (see
Frame on page
Remove the system board:
1.
Remove the two Phillips PM 2.0x3.0 screws (1) that secure the system board to the tablet.
2.
Lift the system board (2) off the tablet.
Reverse this procedure to install the system board.
Display cable on page
Touchscreen board on page
Volume board on page
Bottom trim on page
Audio board on page
64)
Card reader on page
Speakers on page
67)
68)
69)
56)
58)
59)
61)
66)
Tablet components
73