Table of Contents
Advertisement
Remove the battery:
1.
Remove the Phillips PM1.4×2.5 screw (1) that secures the battery cable bracket to
the system board.
2.
Remove the battery cable bracket (2).
3.
Disconnect the battery cable (3) from the system board.
4.
Insert a case utility tool (4) or similar thin tool between the battery and the back cover, and then
detach the battery from the back cover. (The battery is attached to the back cover with double-
sided adhesive.)
5.
Remove the battery (5).
Reverse this procedure to install the battery.
Speakers
Description
Speaker Kit (includes top speaker and bottom speaker and cable)
Before removing the speakers, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the top and bottom covers (see
5.
Remove the display panel assembly (see
Top and bottom covers on page
Display panel assembly on page
Spare part number
775653-001
15).
16).
Speakers
19
Advertisement
Table of Contents
