Table of Contents
Advertisement
Speakers
Description
Speaker Kit (includes top and bottom speakers and cables)
Before removing the speakers, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
5.
Disconnect the battery cable from the system board (see
Remove the speakers:
1.
Unsolder the speaker cables (1) from the system board speaker connectors.
NOTE:
board "positive" terminals. The black speaker cables should be soldered to the system board
"negative" terminals.
2.
Release the speaker cables (2) from the clips built into the display panel assembly.
Back cover on page
When installing the speakers, the red speaker cables should be soldered to the system
12).
Battery on page
Spare part number
785179-001
14).
Speakers
19
Advertisement
Table of Contents
