Table of Contents
Advertisement
Table 5-3
Touch control board and cable descriptions and part numbers
Description
Touch control board
Touch control board cable
1.
Prepare the computer for disassembly (see
2.
Remove the display assembly (see
Remove the touch control board:
1.
Position the display panel upside down.
2.
Disconnect the touch cable from the ZIF connector on the touch control board (1).
3.
Disconnect the two thick ribbon cables from the reverse ZIF connectors on the board (2).
4.
Use a tool to release the board from the display (3). The board is secured with adhesive.
To replace the touch control board, reverse the removal procedures. Run the camera function test after the
repair. For more information, see
Speakers
To remove the speakers, use this procedure and illustration.
Table 5-4
Speaker description and part number
Description
Speaker Kit
Before removing the speakers, follow these steps:
Preparation for disassembly on page
Display assembly on page
Basic camera function test on page
Spare part number
M93498-001
M93497-001
29).
30).
30.
Spare part number
M93499-001
Component replacement procedures
33
Advertisement
Table of Contents
