Audio Board - HP Split 13 x2 PC Maintenance And Service Manual

Audio board

Description
Audio board (includes audio cable and HDMI/dock cable)
Before removing the audio board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Disconnect the tablet from the keyboard dock (see
on page
5. Remove the display rear cover (see
6. Disconnect the battery cable (see
7. Remove the bottom trim (see
To remove the audio board:
1. Disconnect the audio cable from the side of the audio board (1).
2. Disconnect the display cable from the audio board (2).
3. Disconnect the docking cable from the audio board (3).
4. Remove the three Phillips PM2.0×3.0 screws (4) that secure the audio board to the tablet.
5. Lift the audio board from the tablet (5).
64 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
32).
Bottom trim on page
Releasing the tablet from the keyboard dock
Display rear cover on page
Battery cable on page 46).
61).
Spare part number
732284-001
45).