Volume Board - HP Split 13 x2 PC Maintenance And Service Manual

Volume board

Description
Volume board (includes cable)
Before removing the volume board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Disconnect the tablet from the keyboard dock (see
on page
5. Remove the display rear cover (see
6. Disconnect the battery cable (see
To remove the volume board:
1. Disconnect the cable that connects to the side of the volume board (1).
2. Disconnect the middle cable from the ZIF connector (2).
3. Use a flat tool to pry the volume board up and loosen the adhesive that secures it to the tablet (3), and
then remove the volume board (4) from the tablet.
Reverse this procedure to install the volume board.
32).
Releasing the tablet from the keyboard dock
Display rear cover on page
Battery cable on page 46).
Spare part number
732282-001
45).
Tablet components 59