Speakers - HP Compaq 8 1400 Maintenance And Service Manual

Reverse this procedure to install the rear-facing webcamera.

Speakers

Description
Speaker Kit (includes left and right speakers and cables)
Before removing the speakers, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
5.
Disconnect the battery cable from the system board (see
Remove the speakers:
1. Unsolder the speaker cables (1) from the system board speaker connectors.
NOTE:
board "positive" terminals. The black speaker cables should be soldered to the system board
"negative" terminals.
2. Release the speaker cables (2) from the clips built into the display panel assembly.
18 Chapter 5 Removal and replacement procedures
Back cover on page
When installing the speakers, the red speaker cables should be soldered to the system
11).
Battery on page
Spare part number
754528-001
13).