Wlan/Bluetooth Combo Card - HP Split 13 x2 PC Maintenance And Service Manual

WLAN/Bluetooth combo card

The computer uses a card that provides both WLAN and Bluetooth functionality.
CAUTION: The WLAN module and the WWAN module are not interchangeable.
Description
Ralink RT3290LE 802.11bgn 1x1 Wi-Fi and Bluetooth 4.0 Combo Adapter
Broadcom BCM4352 802.11ac 2x2 Wi-Fi + BT 4.0 Combo Adapter
Before removing the WLAN module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Disconnect the tablet from the keyboard dock (see
on page
5. Remove the display rear cover (see
6. Disconnect the battery cable (see
Remove the WLAN module:
1. Position the computer upside-down.
2. Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module.
NOTE:
"1". The WLAN antenna cable labeled "2" connects to the WLAN module "Aux" terminal labeled "2". If
the computer is equipped with an 802.11a/b/g/n WLAN module, the yellow WLAN antenna cable
connects to the middle terminal on the WLAN module.
3. Remove the Phillips PM2.5×3.0 screw (2) that secures the WLAN module to the tablet. (The edge of the
module opposite the slot rises away from the tablet.)
32).
The WLAN antenna cable labeled "1" connects to the WLAN module "Main" terminal labeled
Releasing the tablet from the keyboard dock
Display rear cover on page
Battery cable on page 46).
Spare part number
690020-005
724935-005
45).
Tablet components 51