LevelOne WAB-3003 User Manual page 99

 Setup / Connect:
Connect: Click Connect to associate with the respective AP directly; no further

configuration is required.
Setup: Click Setup to configure security settings for associating with the respective AP or

repeater.
WEP: Click Setup to configure the WEP setting for associating with the target AP.
o
The following configuration box will then appear at the bottom of the screen. For more
information on the WEP security settings, please refer to Section 5.2.3 Security
Settings.
WAB-3003 108M 11g
94
User's Manual
Outdoor PoE CPE/ AP/ Bridge