LevelOne WAB-3003 User Manual page 21

Step 4: SSID Settings
Click on the Wireless button and then select the General tab.

Band: Select an appropriate band from the drop-down list box.

Click on the Wireless button and then select the VAP Config tab.

ESSID: Enter respective ESSID for each VAP in the ESSID field or use the default. ESSID

(Extended Service Set Identifier) is a unique identifier used for networking devices to get
associated with WAB-3003
Note:
For QoS classification, please enable VLAN ID and specify a VLAN ID with respective ESSID.
Click SAVE to save the settings.
WAB-3003 108M 11g
16
User's Manual
Outdoor PoE CPE/ AP/ Bridge