LevelOne WAB-3003 User Manual page 89

 LAN Configuration: Configure LAN and DHCP settings on this page. IP Address and Netmask
are required fields to set up LAN interface.
 IP Address: The IP address of the LAN port.
 Netmask: The Subnet mask of the LAN port.
 DHCP Server: If enabled, devices connected to this system can obtain an IP address
automatically.
Enable/ Disable: Select Enable to activate this function or Disable to inactivate it.
o
Start IP / End IP: Specify the range of IP addresses to be distributed by the DHCP
o
server to clients.
Preferred DNS Server: Enter the IP address of a preferred DNS server; this field is
o
required.
Alternate DNS Server: Enter the IP address of a secondary DNS server; this is optional.
o
WINS Server IP: Enter the IP address of a WINS (Windows Internet Name Service)
o
server; this is optional.
Domain Name: Enter the domain name for this network.
o
Lease Time: It can be chosen from the drop-down list to renew Leased LAN IP.
o
WAB-3003 108M 11g
84
User's Manual
Outdoor PoE CPE/ AP/ Bridge