LevelOne WAB-3003 User Manual page 91

 Trap: When enabled, events on Cold Start, Interface UP & Down, and Association &
Disassociation can be reported to an assigned server.
Enable/ Disable: Select Enable to activate this function or Disable to inactivate it.
o
Server IP Address: Enter the IP address of the assigned server for receiving the trap
o
report.
 System Log: By enabling this function, specify a remote Syslog server to accept system log
messages from the system remotely.
 Enable/ Disable: Select Enable to activate this function or Disable to inactivate it.
 SYSLOG Server IP: The IP address of the Syslog server for receiving the reported events.
 Server Port: The port number of the Syslog server.
 SYSLOG Level: Select the desired level of received events from the drop-down list box.
 UPnP Configuration: This option can be enabled if UPnP service is required by LAN device.
 Enable/ Disable: Select Enable to activate this function or Disable to inactivate it.
 Auto Reboot: The system can be functioning in a healthier state when this service is enabled.
 Enable/ Disable: Select Enable to activate this function or Disable to inactivate it.
 Reboot Time: Select an appropriate time from the drop-down list box. Since all users on the
network will be disconnected during reboot, it is suggested to set the reboot time during an
off-peak period to reduce impacts on the online users.
WAB-3003 108M 11g
86
User's Manual
Outdoor PoE CPE/ AP/ Bridge