LevelOne WAB-3003 User Manual page 22

Step 5: Security Settings
Click on the Wireless button and then select the Security tab.

Select the desired VAP Profile and Security Type from the drop-down list boxes. The above

figure depicts an example of selecting VAP-1 and WEP.
Enter the information required in the blank fields.

Caution:
You must use the same information provided here to configure the network devices that are to
be associated with WAB-3003.
Click SAVE to save all settings configured so far; all updated settings will take effect upon reboot.

Congratulations!
The AP mode is now successfully configured.
WAB-3003 108M 11g
17
User's Manual
Outdoor PoE CPE/ AP/ Bridge