Configuration Save & Restore - LevelOne WAB-3003 User Manual

5.4.3 Configuration Save & Restore
This function is used to backup or restore the current settings. The system can be restored to the
default setting by clicking on Reset. The setting of the device can be backup to a file. It can be used
to duplicate setting to the other WAB-3003 device.
 Reset to Default:
Click Reset to load the factory default settings of WAB-3003. A pop-up screen will appear

to reconfirm the request to restart the system. Click OK to proceed, or click Cancel to
cancel the restart request.
A warning message as displayed below will appear during the reboot period. The system

power must be turned on before the completion of the reboot process.
The System Overview page will appear upon the completion of reboot.

 Backup Settings: Click Save to save the current system settings to a local disk such as the
hard disk drive (HDD) of a local computer or a compact disc (CD).
 Restore Settings: Click Browse to search for a previously saved backup file, and then click
Upload to restore the settings. The backup file will replace the active configuration file currently
running on the system.
WAB-3003 108M 11g
102
User's Manual
Outdoor PoE CPE/ AP/ Bridge