LevelOne WAB-3003 User Manual page 88

 WAN Configuration: Determine the way to obtain the IP address, by Static or DHCP.
 Mode: Determine the way to obtain the IP address, by DHCP or Static.
Static: The administrator can manually set up the static WAN IP address.
o
IP Address: The IP address of the WAN port.
▬
Netmask: The subnet mask of the WAN port.
▬
Gateway: The gateway IP address of the WAN port.
▬
Primary DNS Server: The IP address of the primary DNS (Domain Name System)
▬
server.
Secondary DNS Server: The IP address of the substitute DNS server.
▬
DHCP: This connection type is applicable when the system is connected to a network with
o
the presence of a DHCP server; all related IP information required will be provided by the
DHCP server automatically.
 Bandwidth Limit:
Download: The maximum download bandwidth of WAN interface to be shared by clients.
o
o Upload: The maximum upload bandwidth of the WAN interface to be shared by clients.
 Dynamic DNS: The option can be enabled to bind FQDN-compliant Host Name with this device.
If enabled, the service Provider must be chosen from the drop-down list with provided Host
Name, User Name, User Email and Password.
 DDNS: Select Enable to activate this function or Disable to inactivate it.
 Provider: The name of the DDNS provider that the system is registered with. Select a DDNS
provider from the drop-down list box.
 Host Name: The FQDN registered with the selected DDNS provider.
 User name/ E-mail: The account ID, user name or e-mail, registered with the DDNS
provider.
 Password/ Key: The password of the account registered with the DDNS provider.
WAB-3003 108M 11g
83
User's Manual
Outdoor PoE CPE/ AP/ Bridge