LevelOne WAB-3003 User Manual page 52

 Broadcast SSID: Disabling this function will prevent the system from broadcasting its SSID. If
you disable broadcast of the SSID, only devices that have the correct SSID can connect to the
system.
 Wireless Station Isolation: By enabling this function, all stations associated with the system
can only communicate with the system.
 WMM: The default is Disable. Wi-Fi Multimedia (WMM) is a Quality of Service (QoS) feature that
prioritizes wireless data packets based on four access categories: voice, video, best effort, and
background. Applications without WMM and applications that do not require QoS are assigned to
the best-effort category, which receives a lower priority than voice and video. In short, WMM
decides which data streams are the most important and assign them a higher traffic priority.
< To receive the benefits of WMM QoS >
- The application must support WMM.
- You must enable WMM in this system.
- You must enable WMM in the wireless adapter in your computer.
 IAPP: IAPP (Inter Access Point Protocol) is a protocol by which access points share information
about the stations that are connected to them. By enabling this function, the system will
automatically broadcast information of associated wireless stations to its peer access points. This
will help wireless stations roam smoothly among IAPP-enabled access points in the same
wireless LAN.
 802.11g Protection: When enabled, the associated 802.11g stations will benefit from this
function since their transmission speed will not be affected by the surrounding 802.11b stations.
WAB-3003 108M 11g
47
User's Manual
Outdoor PoE CPE/ AP/ Bridge