Installation; Hardware Installation - LevelOne WAB-3003 User Manual
108m 11g outdoor poe cpe/ap/bridge
Hide thumbs
Also See for WAB-3003:
- Specifications (4 pages) ,
- User manual (110 pages) ,
- Quick installation manual (13 pages)
Table of Contents
Advertisement
3. Installation
3.1 Hardware Installation
The following diagram is a basic network topology which can be used for testing and configuring
the WAB-3003.
Installation Steps:
Step 1.
Connect an antenna to the connector.
Step 2.
Connect the PSE (POWER & DATA OUT) to the PSE 1 connector on the lower panel.
Step 3.
Connect one end of an Ethernet cable to the PSE 2 connector on the lower panel and
connect the other end to a computer.
Step 4.
Connect the power cord to the PSE.
Step 5.
Power on the PSE in order to supply power to the WAB-3003.
WAB-3003 108M 11g
7
User's Manual
Outdoor PoE CPE/ AP/ Bridge
Advertisement
Table of Contents
