LevelOne WAB-3003 User Manual page 27

Step 6: Network Interface Configuration
Click on the System button and then select the Network tab.

【Settings here are for example only.】
WAN Configuration
Enable Static, and then enter the related information in the fields marked with red

asterisks.
Click SAVE to save the settings.

Dynamic DNS Configuration
The Dynamic DNS section is on the same page as WAN Configuration section.

When enabled, choose the service Provider with provided Host Name, User Name/E-mail,

and Password/Key.
Click SAVE to activate all settings configured so far.

LAN Configuration
The LAN Configuration section is on the same page as WAN Configuration section.

Enter the IP Address and Netmask of the LAN port.

Click SAVE to save all settings configured so far; all updated settings will take effect upon

reboot.
Congratulations!
The CPE mode is now successfully configured.
WAB-3003 108M 11g
22
User's Manual
Outdoor PoE CPE/ AP/ Bridge