Panel Function Description - LevelOne WAB-3003 User Manual

2.2 Panel Function Description

WAB-3003
1 Power
2~3 Wireless Signal Strength
4 WLAN
5 Wireless Signal Strength
6 Ethernet
7 RJ-45 PoE Connector
8 N-type Connector
9 Reset Button * (Screw)
Reset Procedure
Make sure the WAB-3003 completes booting and is already running
(The booting process of system usually takes 2 minutes)
Unscrew the screw then you will see the reset button (inside the hole)
Use the provided reset pin to press and hold the reset button for 15 seconds
Release the reset button and leave the system re-booting for 2minutes
WAB-3003 108M 11g
Red LED ON indicated Power on, and OFF indicates
power off
For showing the signal strength situation (2:Yellow;
3:Green)
Green LED ON indicates system ready
For Showing the signal strength situation
Green LED ON indicates connection, OFF indicates no
connection, and BLINKING indicates transmitting data
For connecting to the Power Sourcing Equipment(PSE)
For connecting to an antenna
For testing the system of AP
6
User's Manual
Outdoor PoE CPE/ AP/ Bridge