Setup/ Connect:
Connect: Click Connect to associate with the respective AP directly; no further
configuration is required.
Setup: Click Setup to configure security settings for associating with the respective AP.
WEP: Click Setup to configure the WEP setting for associating with the target AP.
o
The following configuration box will then appear at the bottom of the screen. For more
information on the WEP security settings, please refer to Section 4.2.4. Security
Settings.
WPA-PSK: Click Setup to configure the WPA-PSK setting for associating with the target
o
AP.
The following configuration box will then appear at the bottom of the screen. For more
information on the WPA-PSK security settings, please refer to Section 4.2.4. Security
Settings.
WAB-3003 108M 11g
52
User's Manual
Outdoor PoE CPE/ AP/ Bridge