LevelOne WAB-3003 User Manual page 78

 Universal Repeater: The table will be displayed when Universal Repeater mode is selected. For
more information on the repeater type, please refer to Section 4.2.5 Repeater Settings.
SSID: SSID of the upper-bound AP to be associated with.

Tx Rate: The transmit rate of the Repeater.

SNR: The SNR (Signal to Noise Ratio) indicates the relative signal strength between the

upper-bound AP and the system.
Tx Count: The accumulative number of transmission counts.

Tx Error: The accumulative number of transmission errors.

Encryption: The encryption type used: None, WEP, or WPA-PSK.

Fig 4.5.3-2 Universal Repeater
WAB-3003 108M 11g
73
User's Manual
Outdoor PoE CPE/ AP/ Bridge