Connecting Power Cord - NEC Express5800/R120b-2 User Manual

3-20 Setting Up Your Server

CONNECTING POWER CORD

Connect the provided power cord to the server.
Observe the following instructions to use the server safely. Failure to follow
these instructions may result in death or serious personal injury. See pages 1-4
to 1-11 for details.
Observe the following instructions to use the server safely. Failure to follow
these instructions may cause a fire, personal injury, or property damage. See
pages 1-4 to 1-11 for details.
1.
Plug the provided power cord into the power receptacle on the rear of the server.
2.
Plug the other end of the power cord into the wall outlet.
The AC power LED on the power supply turns green and flashes.
IMPORTANT:
rear of the server.
Do not hold the power plug with a wet hand.
Do not connect the ground wire to a gas pipe.
Do not plug the power cord in to an improper power source.
Do not connect the power cord to an outlet that has an illegal number of
connections.
Insert the power plug into the outlet as far as it goes.
Use the authorized power cord only.
AC power LED
Power unit 2
Power unit 2
(option)
(standard)
Secure the power cord with an AC cord holder on the
WARNING
CAUTION
Power cord for power unit 1
Power cord for power unit 2