Memory Configuration Submenu - NEC Express5800/R120b-2 User Manual

4-12 Configuring Your Server

Memory Configuration submenu

When [Memory Configuration] is selected in the Advanced menu and then the Enter key is pressed,
the screen below is displayed. If an item with an arrow displayed to its left is selected and then the
Enter key is pressed, a submenu is displayed.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Main
M e m o r y I n f o r m a t i o n
H a r d w a r e M e m o r y T e s t
M e m o r y R e t e s t
M e m o r y R A S M o d e
M e m o r y F r e q u e n c y
M e m o r y V o l t a g e
N U M A
Version 1.24.1115n Copyright (C) 2010 American Megatrends, Inc.
For details about the options, see the following table.
Option
Memory Information
Hardware Memory
Test
Memory Retest
Memory RAS Mode
Memory Frequency
Memory Voltage
NUMA
Advanced Security
[ D i s a b l e d ]
[ N o ]
[ I n d e p e n d e n t ]
[ 1 3 3 3 M H z ]
[ L o w ]
[ E n a b l e d ]
Parameters
–
[Disabled] Specify whether to perform a memory test. Specifying
Enable increases the POST startup time.
Enabled
[No] Specify whether to clear the memory error information
and test all DIMMs on the next startup. After the next
Yes
startup, this option is automatically switched to [No].
[Independent] Specify the memory RAS mode. For details about this
feature. See Chapter 9 for details.
Mirroring
Lock Step
Sparing
Auto Specify the memory clock frequency.
800MHz
1066MHz
1333MHz
Specify the voltage at which the memory operates.
Normal
Selecting Normal increases power consumption, but
[Low]
the memory operation clock speeds up.
Disabled Specify whether to enable or disable the Non-Uniform
Memory Access feature (displayed only in 2-CPU
[Enabled]
configuration).
Server Boot Save & Exit
F 1 : G e n e r a l H e l p
F 4 : S a v e E S C : E x i t
Description
–
[ ]: Factory-set