NEC Express5800/R120b-2 User Manual page 524

G-10 Installing Windows Server 2003
6.
The following message is displayed.
manufacturer-supplied hardware support disk
If you use the floppy disk drive, Insert the Windows Server 2003 OEM-Disk for
EXPRESSBUILDER into the floppy disk drive, and press Enter.
NOTE:
A list of mass storage devices is displayed.
IMPORTANT: If you have created the OEM-Disk into the Flash FDD,
connect the Flash FDD before you start the system.
7.
Select the proper Controller and press Enter.
– [LSI MegaRAID SAS RAID Controller Driver (Server 2003 32-bit)]
(When N8103-129/130 RAID Controller is installed.)
The screen of Step 5 is displayed.
8.
<If the SCSI Controller N8103-75/107 is connected>
Press S.
The screen of Step 6 is displayed. Press Enter, and go to Step 9.
<If the SCSI Controller N8103-75/107 is not connected>
Go to Step 10.
Please insert the disk labeled
into Drive A:
*Press ENTER when ready.
If you use the Flash FDD, the message above is not displayed.