NEC Express5800/R120b-2 User Manual page 108

4-20 Configuring Your Server
Option
BIOS Redirection Port
Terminal Type
Baud Rate
Data Bits
Parity
Stop Bits
Flow Control
Continue C.R. after POST
Parameters
[Disabled]
Serial Port A
Serial Port B
[VT100+]
VT-UTF8
ANSI
9600
19200
57600
[115200]
7
[8]
[None]
Even
Odd
[1]
2
None
[Hardware
RTS/CTS]
Hardware
RTS/CTS+CD
Disabled
[Enabled]
Description
Specify whether to enable or disable
direct connections from the
management terminal using the
ESMPRO Manager or hyper terminal
from the serial port specified for this
menu item. If this menu item is enabled,
the following setting menu items are
displayed.
Select the terminal type.
Specify the baud rate used for the
interface with the connected hardware
console.
Specify the data bit width.
Specify the parity bits.
Specify the stop bit setting.
Specify the flow control method.
Specify whether to enable or disable
the continued execution of console
redirection after the POST finishes.
[ ]: Factory-set