NEC Express5800/R120b-2 User Manual page 104

4-16 Configuring Your Server
SATA Configuration submenu
When [SATA Configuration] is selected in the Advanced menu and then the Enter key is pressed,
the screen below is displayed. If an item with an arrow displayed to its left is selected and then the
Enter key is pressed, a submenu is displayed.
For details about the options, see the following table.
Option
SATA Information
SATA Mode
Hard Disk Pre-Delay
Parameters
− This is not displayed when SATA Mode is set to
[RAID Mode].
[IDE Mode] Displays the SATA Mode status (display only).
RAID Mode
[Disable] The system waits the specified time before first
accessing HDD devices during the POST
3 Seconds
processing.
6 Seconds
9 Seconds
12 Seconds
15 Seconds
21 Seconds
30 Seconds
Description
[ ]: Factory-set