Inch Hard Disk Drive - NEC Express5800/R120b-2 User Manual

9.
Power on the server, and run the SETUP utility.
Select the [Boot] menu (described on page 4-33) to set the boot priority. When you install
an additional hard disk drive, the boot priority stored in BIOS is cleared.
10.
Install the front bezel you removed in step 2.
There are tabs on the left side of the front bezel. Engage the tabs with the server frame,
install the front bezel, and lock it with the security key.

3.5-inch hard disk drive

1.
See page 9-4 to prepare.
2.
Locate the slot in which you are going to install a hard disk drive. The server has six slots.
Install the hard disk drives in ascending port number order. The port numbers are
determined by the slot positions.
3.
Remove the dummy tray.
Install dummy trays in all slots.
IMPORTANT:
Keep the dummy tray for future use.
The purpose of a dummy tray is to increase the cooling effect in the
server. Install a dummy tray in slots not containing a hard disk
drive.
Upgrading Your Server 9-13