NEC Express5800/R120b-2 User Manual page 393

6.
Attach the RAID controller to the bracket that was removed from the server chassis.
Use the screws removed in step 6.
7.
Install the RAID controller in the server chassis, and secure it with the screws that were
used to secure the bracket.
8.
Install the components you removed.
IMPORTANT:
This server does not have any connectors to which the connectors of
LEDs for indicating disk access, such as for the RAID controller,
can be connected.
If a RAID controller is connected, use the [Boot] menu of the BIOS
setup utility to set the controller's boot priority to the eighth item or
an item that has higher priority. If the RAID controller is specified
as the ninth item or an item that has lower priority, it will not be
possible to open the RAID controller configuration menu.
Screws
Screws
Upgrading Your Server 9-61