Removing The Principal Outer Covers; Removing The Front Top Cover/Face-Down Output Tray - Kyocera KM-1820 Service Manual

1-6-3 Removing the principal outer covers

(1) Removing the front top cover/face-down output tray

1. Remove the screw and then remove the memory cover.
2. Remove the screw and then remove the rear cover.
3. While unlatching the two latches and then remove the front top cover/face-down output tray.
Screw
Front top cover/face-down
output tray
Memory cover
Figure 1-6-2 Removing the memory cover and rear cover
Latches
Screw
Figure 1-6-3 Removing the front top cover/face-down output tray
Rear cover
Screw
Screw
front top cover
/face-down
output tray
2GM
1-6-3