Kyocera KM-1820 Service Manual page 101

2GM
6. Remove the screw.
7. Remove the toner sensor and spring.
8. Remove two screws.
9. While pressing the latch by using the driver and then remove the MP feed unit.
Toner sensor
Screw
Screw
Spring
Screw
Latch
MP feed unit
Figure 1-6-8 Removing the MP feed unit
10. Remove the stop ring and then remove the MP feed roller.
Stop ring
MP feed roller
Figure 1-6-9 Removing the MP feed roller
1-6-7