U632 Setting Communication Control; Setting The Dis Signal To 4 Bytes; Setting The Short Protocol Transmission; Setting The Reception Of A Short Protocol Transmission - Kyocera KM-1820 Service Manual

3JG
Maintenance
item No.
U632 Setting communication control 3
Description
Makes settings for fax transmission regarding the communication.
Start
1. Press the enter key. The screen for selecting an item is displayed.
2. Select the item to be set using the up/down cursor keys.
3. Press the enter key. The screen for the selected item appears.
Display
1:DIS 4BYTE
2:SHORT PROTO TX
3:SHORT PROTO RX
4:NUM OF CNG (F/T)

Setting the DIS signal to 4 bytes

Sets if bit 33 and later bits of the DIS/DTC signal are sent.
1. Change the setting using the up/down cursor keys.
Display
1: ON
2: OFF
2. Press the enter key. The value is set.
3. To return to the screen for selecting an item, press the back key.

Setting the short protocol transmission

Sets if short protocol transmission is performed.
1. Change the setting using the up/down cursor keys.
Display
1: ON
2: OFF
2. Press the enter key. The value is set.
3. To return to the screen for selecting an item, press the back key.

Setting the reception of a short protocol transmission

Selects whether to receive or ignore transmission using short protocol.
If a short protocol transmission is received when an auto switching device is attached to the machine,
communication problems, including auto switching inability, sometimes occur. Change the setting to ignore
short protocol transmission to prevent such problems.
1. Change the setting using the up/down cursor keys.
Display
1: ON
2: OFF
2. Press the enter key. The value is set.
3. To return to the screen for selecting an item, press the back key.
Setting the CNG detection times in the fax/telephone auto select mode
Sets the CNG detection times in the fax/telephone auto select mode.
1. Change the setting using the up/down cursor keys.
Display
1: 1 TIME
2: 2 TIMES
2. Press the enter key. The value is set.
3. To return to the screen for selecting an item, press the back key.
Completion
Press the back key at the screen for selecting an item. The screen for selecting a maintenance item No. is
displayed.
1-3-14
Description
Description
Sets the DIS signal to 4 bytes.
Sets the short protocol transmission.
Sets the reception of short protocol transmission.
Sets the CNG detection times in the fax/telephone auto select
mode.
Description
Bit 33 and later bits of the DIS/DTC signal are not sent.
Bit 33 and later bits of the DIS/DTC signal are sent.
Description
Short protocol transmission is performed.
Short protocol transmission is not performed.
Description
Receives short protocol transmission.
Ignores short protocol transmission.
Description
Detects CNG once.
Detects CNG twice.