Kyocera KM-1820 Service Manual page 241

Maintenance
item No.
U660 Setting for a PBX
(cont.) Selects the mode to connect an outside call when connected to a PBX.
According to the type of the PBX connected, select the mode to connect an outside call.
1. Change the setting using the up/down cursor keys.
Display
1: EARTH
2: FLASH
3: LOOP
2. Press the enter key. The value is set.
3. To return to the screen for selecting an item, press the back key.
Setting the loop current detection before dialing
Sets if the loop current detection is performed before dialing.
1. Change the setting using the up/down cursor keys.
Display
1: ON
2: OFF
2. Press the enter key. The value is set.
3. To return to the screen for selecting an item, press the back key.
Completion
Press the back key at the screen for selecting an item. The screen for selecting a maintenance item No. is
displayed.
U670 Outputting lists
Description
Outputs a list of data regarding fax transmissions.
Purpose
To check conditions of use, settings and transmission procedures of the fax.
Method
1. Press the enter key.
2. Select the item to be output using the up/down cursor keys.
3. Press the enter key. The selected list is output.
Display
1: SETTING LIST
2: ACTION LIST
3: SELF ST REPORT
4: PROTOCOL LIST
5: ERROR LIST
Description
Description
Earth mode
Flashing mode
Code number mode
Description
Performs loop current detection before dialing.
Does not perform loop current detection before dialing.
Description
Outputs a list of software switches, self telephone number,
confidential boxes, ROM versions and other information.
Outputs a list of error history, transmission line details and
other information.
Outputs a list of settings in maintenance mode
(own-status report) regarding fax transmission only.
Outputs a list of transmission procedures.
Outputs a list of error.
3JG
1-3-23