Kyocera KM-1820 Service Manual page 110

2GM
10. Remove the main PWB (see page 1-6-10).
11. Remove the screw and then remove the grounding plate.
12. Remove the screw and then remove the feed clutch.
13. Remove three stop rings.
14. Remove MP feed clutch (gear), feed clutch (gear), and registration clutch (gear).
MP feed clutch (gear)
Grounding
Stop ring
plate
Screw
Feed clutch (gear)
Stop ring
Screw
Registration clutch (gear)
Stop ring
Feed clutch
Figure 1-6-19 Removing the clutches
1-6-16