Download  Print this page

Hood Sensor (smart Cover Sensor); Setting The Hood Sensor Protection Level; Cable Lock Provision (optional); Security Lock (optional) - HP Xw8400 - Workstation - 4 GB RAM Technical Reference Manual

Hp xw8400 workstation - service and technical reference guide.
Hide thumbs

Advertisement

Hood sensor (Smart Cover Sensor)

The optional hood sensor is a combination of hardware and software technology that can alert you when
the workstation side access panel has been removed. There are three levels of protection, as described
in the following table.
Table 3-5
Hood sensor protection levels*
Level
Level 0
Level 1
Level 2
* These settings can be changed using the Computer Setup (F10) Utility.

Setting the hood sensor protection level

To set the hood sensor protection level:
1.
Power on or restart the workstation. In Windows, click Start>Shut Down>Restart.
2.
As soon as the workstation powers on, press and hold the
Setup (F10) Utility. Press
NOTE:
and press and hold the
If you are using a PS2 keyboard, disregard the keyboard error message that might appear.
3.
Select Security>Smart Cover>Cover Removal Sensor, then side access panel, and follow the
onscreen instructions.
4.
Select File>Save Changes and click Exit.

Cable lock provision (optional)

The rear panel of the chassis can accommodate a cable lock accessory that allows the workstation to
be physically secured to a work area.

Security lock (optional)

This optional feature prevents entire system theft and discourages access panel removal.

Universal chassis clamp lock (optional)

The version without a cable discourages access panel removal and prevents theft of I/O devices. The
version with a cable also prevents entire system theft and allows multiple systems to be secured with a
single cable.

Access panel key lock

This lock prevents removal of the access panel and all internal components. The key is shipped on the
rear of the workstation.
ENWW
Setting
Disabled
Notify User
Setup Password
Enter
If you do not press the F10 key at the appropriate time, you must restart the computer
F10
key again to access the utility.
Description
Hood sensor is disabled (default).
When the workstation is restarted, the screen displays
a message indicating that the workstation side access
panel has been removed.
When the workstation is restarted, the screen displays
a message indicating that the workstation side access
panel has been removed. You must enter the setup
password to continue.
to bypass the title screen, if necessary.
F10
key until you enter the Computer
Desktop management
43

Advertisement

Table of Contents

   Related Manuals for HP Xw8400 - Workstation - 4 GB RAM

Comments to this Manuals

Symbols: 0
Latest comments: