Stock Installation - Avery Dennison Monarch 9485 User Manual

3-5. Belt clip Usage
Insert screw into belt clip.
Tighten the screw with driver as shown.
NOTE
The belt clip is included with the printer but is not required to be used or installed!
8
1
2

3-6. Stock Installation

Open the Paper cover by pressing the
Open button and set the width of paper
guide by turning the knob with finger.
1 2
3 4
Adjust the width of paper guide if
needed.
Put the stock in so it unrolls from the
bottom. Remove the stock core when
it is empty. Pull a short length of stock
out of the printer.
Use two hands to close the cover until it
clicks into place. Press the feed button.
9