3-1-1. Stock PWR
Using this Menu, you can set stock type. This printer uses two kinds of stock, Standard and
High Power. Standard supports tag, label, or receipt and High Power supports linerless and
synthetic
NOTE
The "special" setting is reserved for future supply types. Do not use this setting.
1. In Setup Menu, select StockPWR.
2. Select stock type.
3. You see:.
4. Press any key to exit. Set Values is stored.
20
3-1-2. Backlight
This Menu can activate or deactivate Backlight of LCD.
1. In Setup Menu, select Backlight.
2. Select Disable or Enable
3. You see:.
4. Press any key to exit. Set Values is stored.
21