Step 1 - Installation For The 9860 Printer - Avery Dennison Stacker Monarch 932TM Operating Instructions Manual

S t e p 1 - I n s t a l l a t i o n f o r t h e 9 8 6 0 P r i n t e r
1. Locate the screw hole on the stacker mounting plate.
2. Attach the adjusting bracket to the stacker mounting plate
using a flanged screw as shown (do not tighten all the way).
3. Gently lift stacker and center the guide tabs in the knife
opening.
4. Set the stacker locating pins (on bottom of stacker) firmly in
the adjusting bracket locating hole and mounting plate slot.
5. Tighten the adjusting bracket flanged screw.
6. Connect the stacker cable to the knife.
1-2 Getting Started
Flanged screw
Adjusting
Bracket
Locating Pin
Stacker
Mounting
Plate
Guide Tab
Adjusting Bracket
Locating Hole
Knife Opening
Mounting
Plate
Slot