Using The Battery; Battery Installation; Battery Charging; Using Ac/Dc Adapter - Avery Dennison 9486 User Manual

2 Using the Battery

Use only the provided battery and AC/DC adapter; voltage and electrical current specifications of the
printer and battery charger must match or damage may occur.

Battery Installation

Battery Charging

Using AC/DC Adapter

Battery Charging Lights

LED
Red LED On
Green LED On
Red LED Blinking
1. Insert the battery in the bottom of the printer, and ensure that you
align the battery hook properly.
2. Push the battery into the slot until you hear it snap in place.
Fully charge the battery prior to use; use the AC/DC adapter or
optional Single/Quad battery charger.
1. Turn off the printer power.
2. Connect the power cord to the AC/DC adapter and
then connect AC power.
3. Open the cable port cover.
4. Connect the AC/DC adapter to the power
connector.
Charge Status
Charging
Fully Charged
Error Replace or Reinstall Battery
Charge Time
Within 3 hours
9